Indiana Foil Surf & Wing Fuselage 650

The Surf & Wing Fuselage 650 is milled from hardened T6 6061 aluminum and has secure grooves to hold the front wings tightly on all four sides. It is tapered towards the back to save weight. The recessed aluminum cartridge provides a rigid and direct connection to the mast. The sacrificial zinc anode reduces the oxidation of the aluminum. The four holes in the fuselage allow for three positions of the stabilizer. The three different angle adapters allow the angle of attack of the stabilizer to be adjusted to 1, 2 or 3 degrees. This means that the stability and agility of the foil can be changed according to personal preference and skill level. The windsurf fuselage can accommodate all Indiana front wings and stabilizers.

For one complete Foil you need to follow this 7 steps:
Step 1: Choose one of six Frontwings
Step 2: Choose one of three Stabilizers
Step 3: Choose one of two Fuselages
Step 4: Take the Set of Angle Adaptors
Step 5: Choose one of three Mast lengths
Step 6: If you have a board with two US Fin Boxes/Tracks you choose the Baseplate. If you have a Deep Tuttle/Tuttle Box you choose the Deep Tuttle/Tuttle Adaptor Head AND the Tuttle Adaptor Plate
Step 7: Take the Set of Mast / Fuselage Screws
Step 8: Get yourself some TefGel

All parts are compatible to each other!