Indiana Wave Foil 3'7 Carbon
New for 2024 the new Wavefoil Board is the most modern design to spring out of Gunnar “Chinatown” Biniasch brain.
The WaveFoil series is for riders looking for a board that excels in the waves with or without a wing.
Designed to be prone paddled or used with a wing it has an amazing low end and thanks to the T-Tail shape, it does not catch up on the wave face on hard turns.
The 3'7" is the board for Pro Level Surf and Wingfoilers. It is also a great Kitefoil Board
All Indiana Wavefoil Boards come complete with a Bag, FootStraps and Screws.
Features:
Gunnar spent a long time testing and refining the new concepts on this board, making sure everything worked in harmony
New 2024 Board Features:
Release Rocker 2.0: The Tail rocker has been increased to maximize the acceleration and allow the board to release from the water with no resistance.
Deep Concave Deck: The Deep Ergonomic Concave in the deck give you maximum control as it locks in your front foot without being uncomfortable. The concave is deepest under the front foot and gets more shallow towards the back of the board. To prevent the water from pooling at your feet, the concave extends all the way to the back of the board which creates a channel for the water to escape.
Concave Rails: The new concave rails concept allow you to have two boards in one. Instead of a straight beveled rail, the Concave Rails allow the board to sit a bit deeper on the water when displacing, which gives you increased roll stability, but when you pump the board, the top board is effectively removed from the water and only the reduced hull is planning which greatly helps the release of the board from the water.
Round Bottom Hull: The Hull features a round bottom hull. This helps the board accelerate in displacement mode, getting you more initial speed before you start pumping up. The round Bottom Hull is also less hard on your knees when landing jumps or hitting chop.
HSH (Hard-Soft-Hard ) Rail Progression: The bottom rail is sharp near the Tail, but has a softer section under the front foot, which gets sharp again at the nose. This makes the water entry onto the rail profile more efficient and channels the water under the board.
Length: 3'7" - 109cm
Width: 18" / 45.7cm
Thickness: 3 1/4 / 8.3cm
Volume: 29 L
Weight: 3.3kg
Bag: Boardbag
Including: V-Footstrap Set incl. Screws
Material: Material: EPS Foam, Carbon, Fiberglass, PVC, Epoxy / Construction: Carbon-PVC-Sandwich on top, Carbon-Fiberglass-Sandwich on bottom / Production Technique: Vacuum Lamination / EVA Pads: Crocodile Groove / Foil-Connection: 2 x 32cm LIO-TEC-Tracks
Range of Use and Level:
Range of Use:
SUP
Wing *****
Wind
Surf ****
Downwind
Kite ***
Wake ***
Pump ***
Rider Level:
Beginner *
Advanced ****
Professional *****